IronLadd PlumbingLicensed · CFC1434072 Call now
← All articles

November 12, 2026

Leak Detection Service: How It Works and When to Call

Plumber locating a hidden leak in a wall

A leak detection service finds where water is escaping, so the repair opens one small section of wall, slab or yard instead of several. If your water bill jumped, a meter keeps moving with everything off, or you smell damp with no visible source, confirm the leak with the meter test below and call a licensed plumber. In the St. Petersburg area, we find and repair leaks at IronLadd Plumbing, with 24/7 availability and most jobs completed within 24 hours.

Ironladd
Get Help With a Plumbing Leak
IronLadd Plumbing provides leak repair in St. Petersburg, alongside emergency plumbing services for residential and commercial properties.

TL;DR

  • Shut off all water use, record your meter, and check it again after two hours. Any change points to a probable leak, according to the EPA WaterSense checklist.
  • Hidden leaks show up as unexplained bill spikes, the sound of running water, pooling, rust, moisture or mold.
  • A sewer camera inspection is for drain and sewer problems: roots, cracks, offsets, blockages and collapsed sections.
  • In an active leak, stop the water, contain it, document the damage and call a plumber the same day.
  • IronLadd handles leak repair, drain clearing and sewer repair across the St. Petersburg area, 24/7.

Table of Contents

What a leak detection service actually does

Most leaks are not dramatic. Water seeps inside a wall, under a slab or along a buried line, and you notice only the side effects. The job of a leak detection service is to turn “something is wrong somewhere” into “the problem is at this spot.”

A good appointment follows a simple logic:

  1. Confirm that a leak exists. The plumber checks your meter behavior, water pressure and the history of your bills.
  2. Isolate the system. Is the leak on the supply side (pressurized water lines), the drain side (waste lines), or in a fixture or appliance such as a toilet, water heater or irrigation line?
  3. Pinpoint the location. Technicians use a mix of listening equipment, moisture and temperature readings, pressure testing and, for drains, video cameras. The right mix depends on the pipe material, how deep it runs and what surrounds it.
  4. Explain the repair options. Once the spot is known, the repair can be targeted, and you can decide with a clear scope in front of you.

The point of detection is to avoid guessing. Cutting open drywall or a concrete floor on a hunch costs far more than locating the leak first.

Signs you may have a hidden leak

The EPA’s WaterSense program lists the everyday clues: a spike in your water bill, the sound of running water or drips when nothing is in use, and visible signs such as pooling water, rust, moisture or mold (EPA checklist).

In Florida homes, a few patterns deserve attention:

  • Warm spots on a slab floor or a water meter that runs while the house is quiet, which can point to a leak in a line beneath the slab. Our guide to slab leak signs, detection and methods covers this in detail.
  • Musty smells or stains on walls and ceilings below a bathroom or near a water heater.
  • Soggy or unusually green patches in the yard along the path of your service line or sewer lateral.
  • Slow drains, gurgling or recurring backups, which can mean a drain or sewer defect rather than a supply leak.

Two checks you can do before the plumber arrives

These take minutes and give your plumber useful information. They are for confirming a problem, not for repairing it.

The meter test

Turn off every faucet and appliance that uses water, including the ice maker and irrigation. Record the meter reading, wait two hours without using water, and read it again. If the numbers differ, a leak is probable, according to the EPA. Write both readings and the times down. If the meter moves with everything off, tell the plumber when you call.

The toilet dye test

The same EPA checklist suggests adding food coloring to the toilet tank and waiting 10 minutes without flushing. If color shows in the bowl, the toilet is leaking. Toilets are a common source of quiet, continuous water loss, and this test separates a fixture leak from a leak in a wall or slab.

If both tests come back clean but your bill is still climbing, or if the meter test fails, the leak is somewhere you cannot see. That is the point to bring in a professional.

Sewer camera inspection: when it fits

Searches for sewer camera inspection, drain camera inspection and sewer scope inspection all describe the same idea: a small video camera on a flexible line travels through a pipe so the inspector can see its condition without digging.

This is different from finding a pressurized water leak. It answers drain and sewer questions, such as why a line keeps backing up, what is happening in the yard, or what condition a lateral is in before you buy a property.

InterNACHI’s Sewer Scope Inspection Standards of Practice defines a sewer scope as a video inspection of the lateral sewer line, from the house at or near the foundation to the municipal or HOA tap or septic tank. It lists the defects an inspector should report when visible:

  • cracks and root intrusion
  • offsets greater than 1/4 inch
  • more than 1 inch of standing water
  • blockages or restrictions
  • crushed, broken, separated or collapsed sections
  • excessive rust, scale or grease
  • deteriorated concrete, an egg-shaped line, or delamination

That list is a useful way to read any inspection report. A root intrusion is a different problem from an offset joint, and the fix differs. Roots may call for clearing and a targeted repair. A collapsed or separated section generally calls for sewer line repair or replacement.

If a camera finds a problem in your line, we handle the next step through our sewer repair and replacement service. If the issue is a stubborn clog, our drain or blockage clearing starts at $99.

What to expect during a leak detection appointment

Appointments vary with the symptom, but they tend to follow the same arc.

Four stages of a leak detection appointment

Questions first. Expect questions about when you noticed the problem, where the water shows up, how your bills have changed and whether you have done any recent work. Bring your meter readings and a few recent bills.

Walkthrough and testing. The plumber checks fixtures, the water heater, visible lines and the areas where you saw signs. Depending on what the symptoms suggest, they may isolate sections of the system to see which part loses water.

Location of the leak. Once the area is narrowed down, the plumber pinpoints it without opening more of the structure than necessary. For drain lines, a camera shows the inside of the pipe directly.

A written scope. You should leave knowing where the leak is, what caused it, what the repair involves and what it costs. Transparent pricing and clear warranties are part of how we work at IronLadd, and we cover both labor and manufacturer parts.

What affects the cost

No single number fits every home, and any figure quoted without seeing the property is a guess. These are the factors that move the price:

  • How hard the leak is to reach. A line in an accessible crawl space is a different job than one under a slab or a driveway.
  • Which system is involved. Supply lines, drains, sewer laterals and water heaters each need different equipment.
  • Time on site. Intermittent leaks and multiple possible sources take longer to isolate.
  • The property. Larger buildings, commercial properties and multi-unit buildings have more pipe to check.
  • The repair itself. Finding the leak and fixing it are separate line items. Water heater work, for instance, starts from $1,450 at IronLadd, and a drain clearing is $99.

Treat detection and repair as one decision. Paying to find a leak and then waiting weeks to fix it lets the damage continue. When one crew does both, you get a single scope, a single warranty and no gap between diagnosis and repair.

Does insurance cover it?

It depends on your policy, and the wording matters. Many homeowners policies treat sudden, accidental water damage differently from long-term seepage or wear, and coverage for the cost of finding the leak is often handled separately from coverage for the damage it caused. Read your policy or ask your insurer or agent directly which of those apply to you.

Whatever the answer, photos, videos, your meter readings and the plumber’s written findings make a claim much easier to support. Ask us for a written description of the cause and location of the leak when the work is done.

What to do the moment you suspect an active leak

A slow drip can wait a day. Water running through a ceiling or across a floor cannot. For a water emergency, property management guidance recommends stopping the water if possible, containing it, cutting power to affected areas when flooding is significant, documenting the damage with photos or video, calling a contractor, and contacting the insurer for significant incidents (Vertical Rent).

In practice:

  1. Shut off the water at the fixture’s valve or at the main shutoff. Know where the main is before you need it.
  2. Contain and dry what you can with towels, buckets and a wet vacuum. If water has reached outlets or appliances, do not step into standing water; shut off power to that area from the breaker panel, or call an electrician if you cannot do so safely.
  3. Photograph everything before you move or clean up.
  4. Call a plumber. Our crews are available 24/7, and we complete most jobs within 24 hours.
  5. Call your insurer if the damage is significant.

If the water is coming from above rather than from a pipe, the roof may be the source. Owners of commercial buildings can read about commercial roof leak repair to see what that path looks like.

If a pipe has burst, see our guide to burst pipe repair. If sewage is involved, read what to do after a sewage backup before you touch anything.

For landlords and property managers

A leak in a rental carries extra weight: tenants, neighboring units, documentation and deadlines. The sequence that works is to stabilize the emergency, communicate with tenants, document the incident and the actions taken, dispatch the right contractor, and follow up until the issue is resolved (Vertical Rent).

Two habits save money. First, read the water meter for each building monthly so a rising baseline gets noticed early. Second, keep one plumbing contractor on call who already knows your properties. We serve homeowners, businesses, property managers and landlords, and our plumbing services include routine maintenance meant to catch problems before they become emergencies.

Our perspective

Most leaks we are called to started small and got expensive because nobody knew where the water was going. The bill crept up, a stain appeared, and by the time someone called, the damage had spread.

Our view is simple: find the leak, fix it properly, and put the price and the warranty in writing. We stand behind our labor and the manufacturer parts we install. We would rather a customer call about a meter that will not stop moving than about a ceiling that came down.

Prevention matters as much as repair. Drain cleaning and routine maintenance keep small defects from turning into a sewer repair or a slab leak, and that is how a plumbing system stays quiet for years.

Shawn

Leak repair with IronLadd

When you know or suspect a leak, our leak repair service covers homes and businesses in St. Petersburg, Clearwater, Largo, Seminole, Gulfport, Dunedin, Oldsmar, Safety Harbor and nearby areas. We are available 24/7, and most jobs are completed within 24 hours. Pricing is transparent, and our work carries clear warranties on labor and on manufacturer parts.

Ironladd

If the problem sits in a line under your yard, our sewer repair and replacement service handles that too. For anything else, start at ironladd.com.

FAQ

How does leak detection work?

It starts by confirming the leak, usually with meter readings and symptoms, then narrowing down which system is losing water. The plumber then pinpoints the spot using equipment suited to the pipe and its location. Drain lines can be viewed from the inside with a camera.

How can I tell if I have a leak without a plumber?

Turn off all water use, record your meter, and read it again after two hours. A change means a probable leak, per the EPA. A toilet dye test also takes just 10 minutes. If either test points to a leak, call a plumber.

When do I need a sewer camera inspection?

Consider one for recurring backups, slow drains in several fixtures, wet spots in the yard along the sewer line, or before buying a property. It shows cracks, roots, offsets, blockages and collapsed sections that cannot be seen from the surface.

Does home insurance cover leak detection?

It varies by policy. Sudden and accidental water damage is often treated differently from gradual seepage, and the cost of locating a leak may be handled separately from the damage. Ask your insurer before you file, and keep photos, meter readings and the plumber’s written findings.

Should I fix a small leak right away?

Yes. A leak that is small today keeps running every hour, adds to your bill and can damage framing, flooring and drywall over time. Shut off the water to the affected fixture if you can, and schedule the repair promptly.

Sources

Need a plumber today?

Call or Text (727) 365-7882
Call now — (727) 365-7882