November 4, 2026
Grease Trap Cleaning: Schedules, Costs and What to Expect

Grease trap cleaning means emptying the trap of water, fats, oils and grease (FOG) and food solids, scraping the walls and baffles, and sending the waste to a hauler or recycler. Small traps under a sink are typically cleaned about monthly. Large in-ground interceptors are typically cleaned about quarterly. Either one should be cleaned sooner when grease reaches about a quarter of the liquid depth. Pricing depends almost entirely on trap size, and records of every service matter as much as the cleaning.
This guide is for restaurant owners, property managers and landlords in the Tampa Bay area who want to keep kitchen drains running and stay on the right side of local sewer rules.
TL;DR
- Clean a grease trap when grease or oil reaches 25% of the liquid level, and on a fixed schedule even before that: monthly for point-of-use traps and quarterly for large in-ground interceptors, per one city’s guidelines.
- Cost scales with size: public bids in one Texas county listed $185 per service for a 1,000-gallon trap and $5,700 to $16,500 for a 30,000-gallon trap.
- Interceptors over 10 gallons generally need a permitted or licensed FOG hauler, and you should keep the service manifests on site.
- Skip hot-water flushing and additives. They do not replace pumping.
- Slow kitchen drains downstream of the trap are a plumbing job. We clear them, and we repair the sewer line when the problem goes deeper.
Table of Contents
- What a grease trap does and who needs one
- How to tell a grease trap needs cleaning
- How often to clean a commercial grease trap
- What grease trap cleaning involves
- What grease trap cleaning costs
- What to check when you hire a grease trap service
- When the problem is the drain, not the trap
- Keeping the trap and the drains healthy
- Perspective
- Clear drains behind your kitchen, any hour
- FAQ
- Sources
What a grease trap does and who needs one
A grease trap catches FOG before it travels on into the building’s pipes. Wastewater passes through, while grease floats and food solids settle, so neither gets into the sewer system. A trap captures FOG before it enters the plumbing and keeps solids and grease out of the sewer.
Who needs one is mostly a question of what the property does with food:
- Restaurants, cafeterias, bakeries, delis, food courts and similar businesses. Food service establishments that discharge grease or oil from kitchens, dishwashing or food preparation are expected to have one. That guidance excludes residences that do not prepare or sell food commercially.
- Multi-tenant buildings with a kitchen tenant. If you own the building, the trap or interceptor is often your problem too, even when the tenant creates the grease.
- Some older homes. Homes with older plumbing or clog-prone septic systems may benefit from one, though a residential trap is a different, much smaller job than a restaurant interceptor.
Rules differ by city and utility. Your local sewer utility or building department sets the size, type and inspection requirements for your address, so confirm those before you install or replace anything.
Traps versus interceptors
People use the words loosely, but the two are different in practice.
| Point-of-use trap | In-ground interceptor | |
|---|---|---|
| Location | Inside, usually under or near the sink or dishwasher | Underground, outside the building |
| Size | Small, often a few gallons to a few dozen | Hundreds to thousands of gallons |
| Typical cleaning cadence (Boston guidelines) | Monthly | Quarterly |
| Who usually cleans it | Staff or a service company | A licensed hauler with a pump truck |
The cadences in the table come from Boston’s commercial kitchen grease trap guidelines. Treat them as a sensible baseline, then adjust to your own volume.
How to tell a grease trap needs cleaning
The most useful rule is a measurement, not a calendar. Boston’s guidelines say to clean the trap when grease or oil reaches 25% of its liquid level. Past that point the trap loses capacity to hold new grease, and the excess slips through to your drain line.
Watch for these signs between scheduled cleanings:
- Sinks or floor drains in the kitchen that drain slowly, then gurgle
- A sour or rotten smell near the dish area or outside near the interceptor lid
- Water backing up from floor drains at the end of a busy service
- Visible grease layer thickening each time someone checks the trap
- Repeated drain clogs that return a week or two after clearing
A backup is the expensive way to find out. Built-up FOG and food solids can block building plumbing or sanitary sewer lines and overflow into buildings, streets or the environment. For a restaurant that also means lost service days.
How often to clean a commercial grease trap

Start with the baseline: monthly for point-of-use traps, quarterly for large in-ground interceptors, and sooner at the 25% mark. Then adjust for your kitchen.
Factors that push the schedule shorter:
- Undersized trap. More frequent cleaning may be necessary if the trap is not sized correctly for the restaurant’s operations, menu or number of meals served.
- Fry-heavy or high-fat menus. Fried chicken, burgers, wings and anything braised in fat load a trap quickly.
- High covers. A busy lunch and dinner service, banquets or catering add up fast.
- Poor scraping habits. Plates that go to the dish pit with food and grease still on them fill the trap with solids.
Most owners settle into a rhythm after three or four cycles by recording how full the trap is at each visit. If it is always near 25% at the quarterly visit, move to every two months. If it is nearly empty, you can keep the current schedule with confidence.
What grease trap cleaning involves
A proper cleaning is more than pumping out the top layer. The steps below combine guidance from Capital Region Water’s best management practices manual and Boston’s guidelines.
- Shut down connected equipment and let the water in the trap cool before opening it.
- Remove the lid and ladle or pump out the grease and oil layer.
- Remove the water and waste, including the settled food solids that do not float.
- Scrape the sides, lid and baffles. Boston’s guidance also covers removing and scraping the baffles and cleaning the bypass vent.
- Reassemble and refill with clean water so the trap can seal and work.
- Dispose of the waste properly. The capture material goes to a hauler or recycler, or follows your solid-waste procedures. Never pour it down a drain.
- Record the service (more on that below).
The waste hauler or renderer that already collects your used fryer oil normally accepts material removed from the trap too, so ask them first. It can save you a separate pickup.
What not to do between cleanings
Two habits seem helpful but are not. Flushing a trap with large amounts of hot water, or adding chemical or bacterial additives, is something utilities advise against. Hot water melts grease so it moves down the line, then it cools and hardens in the pipe. The grease has not gone anywhere. It has just become a drain problem for someone else, usually you.
What grease trap cleaning costs
Price depends on trap size, how full it is, how far the truck has to go and how often you book. Public bid documents are one of the few places where real per-service figures are written down. In 2023, Tarrant County, Texas listed $185 per service for a 1,000-gallon trap and $5,700 to $16,500 per service for a 30,000-gallon trap.
Those are Texas government bids from 2023, so use them to understand the scale rather than as a quote for Pinellas County. What they show is clear: a mid-size interceptor is a modest recurring expense, and a very large one is a serious one. The cheaper approach for most kitchens is a correctly sized trap, cleaned on schedule, rather than a trap that overflows and needs emergency work.
When you collect quotes, ask what each price includes:
- Full removal of contents, not a partial skim
- Scraping of walls and baffles
- Disposal fees
- Written service record
- Any minimum charge or trip fee
What to check when you hire a grease trap service
This is where owners and property managers can protect themselves.
Licensing. Rules vary by utility, but one example is clear: for interceptors over 10 gallons, a permitted or licensed FOG hauler is required, and haulers must remove all contents. Ask your local sewer utility what hauler permits apply where you operate.
Records. The same Arkansas utility says users must keep service manifests on site for at least three years. Boston’s utility provides grease control logs to record the cleaning date, amount removed and a signature confirming the work. Even where your local rules are less specific, a simple log makes inspections painless.
Be there when it happens. Rogers Water Utilities recommends users witness interceptor pumping, cleaning and maintenance so they can see it is done properly. A manager who watches the first cleaning learns what a healthy trap looks like.
A short checklist for the visit:
- Is the license or permit documented?
- Was every compartment emptied, not just the top layer?
- Were baffles scraped and the vent checked?
- Did you get a signed record with date and volume?
- Is the trap refilled with water before the truck leaves?
When the problem is the drain, not the trap
Sometimes a grease trap is cleaned on time and the kitchen still backs up. That points to the pipes. Grease that has already passed the trap coats the line, collects food bits and narrows it until water slows down. Kitchen lines in older buildings also suffer from root intrusion, bellied pipe and cracked joints, none of which any trap cleaning will fix.
That is the point where a plumber is the right call.
- Slow or blocked kitchen drains: our drain and blockage clearing is a published $99 one-off service.
- Repeated backups or sewage smell outside: the issue may sit in the main line, which we handle through sewer line repair and replacement.
- Ongoing upkeep across a property: our plumbing services cover repair and routine maintenance for residential and commercial clients.
If a backup hits after hours, we offer 24/7 emergency plumbing in St. Petersburg, and we serve Largo, Clearwater, Tampa, Oldsmar and the surrounding area.
Keeping the trap and the drains healthy
Good habits between cleanings reduce how often anything goes wrong:
- Scrape plates dry into the trash before washing.
- Collect fryer oil in a container for your rendering pickup instead of rinsing it.
- Use sink strainers to stop solids from reaching the trap.
- Train new staff on what never goes down the drain.
- Keep a log next to the trap and write down how full it was.
- Do not flush with hot water or lean on additives, as covered above.
- Schedule a drain check with a plumber if the trap is clean but flow is still slow.
Perspective
Most grease emergencies we see are not a surprise. The signs were there for weeks: a gurgle, a smell, a drain that took a little longer each Friday night.
Our view is simple. Treat the trap and the drain line as one system. The trap holds the grease back, and the line behind it has to stay clear for the kitchen to work. When one gets neglected, the other pays for it.
That is why we put so much weight on clear drains, honest pricing and warranties on our labor and on manufacturer parts. A kitchen cannot afford to wait through a long outage, so we are available around the clock, and most jobs are completed within 24 hours.
If you manage a property with a commercial kitchen, keep your service records, keep your lines clear, and call us before a slow drain becomes a shutdown.
Shawn
Clear drains behind your kitchen, any hour
IronLadd Plumbing serves homeowners, businesses, property managers and landlords across St. Petersburg and nearby cities, with 24/7 availability. Drain or blockage clearing is $99 one-off, and our technicians use modern tools aimed at long-lasting results.

If a kitchen line is slow, backing up or smells, book drain clearing with us or see everything we do at IronLadd Plumbing.
FAQ
How often should a restaurant clean its grease trap?
Boston’s guidelines call for monthly cleaning of point-of-use traps and quarterly cleaning of large in-ground interceptors. Whatever the schedule, clean it as soon as grease or oil reaches 25% of the liquid level. Heavy fryer use or an undersized trap means shorter intervals.
How much does it cost to clean a commercial grease trap?
It depends on size. Tarrant County, Texas bids in 2023 listed $185 per service for a 1,000-gallon trap and $5,700 to $16,500 for a 30,000-gallon trap. Local prices differ, so ask for quotes that spell out what is included.
Can I clean a grease trap myself?
Small point-of-use traps are often cleaned by staff following the steps above. Interceptors over 10 gallons typically require a permitted or licensed hauler under rules like those in Rogers, Arkansas. Check your local utility’s requirement before you decide.
Do I need a grease trap at home?
Residences that do not prepare or sell food commercially are generally excluded from food service grease trap rules. Homes with older plumbing or clog-prone septic systems may still benefit from one. If kitchen drains clog often, a plumber can check the line itself.
What should I do with the grease removed from a trap?
Contact a hauler or recycler for pickup, or follow your solid-waste procedures. The hauler that collects your used fryer oil usually accepts trap waste as well. Never pour it back down a drain.
Sources
- Frequently Asked Questions Concerning Grease Traps, Spartanburg Water
- Residential Grease Traps: Do You Need One?, Today’s Homeowner
- Grease Trap Guidelines, Boston Water and Sewer Commission
- Fats, Oils, and Grease Best Management Practices Manual, Capital Region Water
- FOG guidance, City of Santa Clara
- RFB 2023-033 Annual Contract for Grease, Lint, Oil and Sand Trap Cleaning Services, Tarrant County
- Fats, Oils, and Grease (FOG) Policy, Rogers Water Utilities
- For Restaurants & Food Service, City of Fort Wayne Utilities
Recommended
Need a plumber today?
Call or Text (727) 365-7882